Roller Mill for sale is a widely used drying and grinding equipment, which can be widely used in grinding cement raw materials or cement clinker and other building, chemical, ceramic, and other industrial raw materials. Roller Mill for sale's main economic and technical indicators are output, the qualified rate of chemical components, product fineness, moisture, and so on.
(1) The main factors that affect the fineness of a roller mill for sale are the rotational speed of the separator and the wind speed at this place. The general wind speed can not be adjusted arbitrarily, so adjusting the rotational speed of the separator is the main means to control the fineness of the product, the separator is variable frequency stepless speed regulation, and the higher the speed, the finer the product fineness. Roller Mill for sale product fineness is very homogeneous, but can not be too fine, should be controlled in the required range. The product is too fine, not only difficult to operate and causes waste.
(2) The air temperature and air volume of the roller mill for sale are the factors that affect the moisture content of the product. Air volume is basically constant, and should not be arbitrarily changed. Therefore, the temperature of the air in the mill determines the water content of the material out of the mill. In order to prevent the problem of homogenization storehouse in winter, the water content of grinding material is 0.25%. Less than 5% and should not exceed 0.7%.
(3) The factors that affect the output of the roller mill are mainly the tension pressure of the roller mill for sale and the reasonable matching of material layer thickness. Ultra-high tension pressure, grinding capacity, and the thinner the material layer, the better the grinding effect. But must be in smooth operation under the premise of the pursuit of output, otherwise counterproductive.
If you have any questions about the roller mill for sale, please don't hesitate to contact us and we'll be right with you.
